Double Sphere Rubber Flexible Expansion Joint-manufacture,factory,supplier from China

Rubber soft joints have been widely used in the industry. The installation of rubber soft joints requires different installation requirements according to different types of rubber joints. Threaded screwed rubber joints: Pay attention to the installation of screwed rubber joints. The pipe fittings are laid flat on a horizontal surface. When installing, it is necessary to screw the threaded structure into the lifting section of the pipe fittings, and then screw the other section of the pipe fittings, keeping it on the horizontal plane to prevent uneven force during the installation process.

1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden. 2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top). 3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force). 4. Gate valve with transmission mechanism shall be installed according to the product instruction manual. 5.

The filter net adopts stainless steel double-layer net structure, which is durable, advanced in structure, small in flow resistance, convenient in sewage discharge, etc. It can be used in water, steam, oil, nitric acid, urea, oxidizing medium and other media. According to the user's needs, the mesh number of filter screen should be set, generally, the water supply network is 18-30 mesh, the ventilation network is 40-100 mesh, and the oil supply network is 100-480 mesh.

In production and life, the emergence of valves is that the utilization rate of their valves and accessories is getting higher and higher, such as check valves, check valves, electric butterfly valves, pneumatic butterfly valves, rubber soft joints, electric ball valves, one-way valves, and wafer butterfly valves. , filter, etc., which have brought great convenience to production and life.

Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.

Check valve refers to the valve that automatically opens and closes the valve flap by relying on the flow of the medium itself to prevent the backflow of the medium, also known as check valve, one-way valve, reverse flow valve, and back pressure valve.

Test valve refers to the hole and remaining elements of the circular disc and with the aid of its own weight and media stress generated motion to block the media float lower back valve.  automatic valve elegance, additionally referred to as test valve, one-way valve, backflow valve or isolation valve.  disc movement is split into lifting and swing.  elevate test valves are comparable in creation to globe valves besides for the stem that drives the disc.  the medium flows in from the inlet quit (decrease side) and flows out from the hole give up (higher aspect).  valve

The purpose of using check valve is to avoid the backflow of medium, generally in the outlet of the pump should be installed check valve. In addition, the outlet of the compressor should also be installed check valve. In summary, in order to avoid the backflow of the medium, in the equipment, installation or pipeline should be installed check valve in general in the nominal diameter of 50mm of the horizontal pipeline are selected vertical lift check valve. Straight lift check valve in the horizontal pipeline and straight pipeline can be installed.

The check valve opening and closing parts are opened or closed by themselves by the flow and force of the medium to prevent the backflow of the medium. The valve is called a check valve. The check valve belongs to the automatic valve category, which is mainly used in the pipeline where the medium flows in one direction, and only allows the medium to flow in one direction to prevent accidents. The check valve, also known as a one-way valve or a check valve, is used to prevent the backflow of the medium in the pipeline.

Entering 2022, our orders for butterfly valves and check valves are increasingly full, and the delivery date has been scheduled to April. We will continue to maintain a booming production and sales situation, and will not be affected by the Spring Festival holiday at all. The delivery date will start in late February.In addition, in a new field, the photovoltaic new energy business sector, our company continued to win the bid for the supporting projects for the newly expanded production base of JA Technology and LONGi Group.