flange type rubber expansion joint-manufacture,factory,supplier from China

Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.

Rubber soft joints have been widely used in the industry. The installation of rubber soft joints requires different installation requirements according to different types of rubber joints. Threaded screwed rubber joints: Pay attention to the installation of screwed rubber joints. The pipe fittings are laid flat on a horizontal surface. When installing, it is necessary to screw the threaded structure into the lifting section of the pipe fittings, and then screw the other section of the pipe fittings, keeping it on the horizontal plane to prevent uneven force during the installation process.

Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.

In production and life, the emergence of valves is that the utilization rate of their valves and accessories is getting higher and higher, such as check valves, check valves, electric butterfly valves, pneumatic butterfly valves, rubber soft joints, electric ball valves, one-way valves, and wafer butterfly valves. , filter, etc., which have brought great convenience to production and life.

FIRST:The difference between butterfly valve has a pin and without pin: Price: the without pin butterfly valve is more expensive than the pin ones. Usage: WITHOUT PIN TYPE REDUCE THE RISK OF LEAKAGE.

Test valve refers to the hole and remaining elements of the circular disc and with the aid of its own weight and media stress generated motion to block the media float lower back valve.  automatic valve elegance, additionally referred to as test valve, one-way valve, backflow valve or isolation valve.  disc movement is split into lifting and swing.  elevate test valves are comparable in creation to globe valves besides for the stem that drives the disc.  the medium flows in from the inlet quit (decrease side) and flows out from the hole give up (higher aspect).  valve

Butterfly valve is a type of valve that uses a spherical butterfly plate as the opening and last component and turns with the valve stem to open, close and alter the fluid channel. the butterfly plate of the butterfly valve is set up in the diameter route of the pipe. in the cylindrical channel of the butterfly valve frame, the disc formed butterfly plate rotates around the axis of the valve stem at an perspective among 0 ° and 0 °. whilst the butterfly plate is at 0 °, the valve is closed, and when the butterfly plate is at ninety °, the valve is absolutely opened.

Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.

The purpose of using check valve is to avoid the backflow of medium, generally in the outlet of the pump should be installed check valve. In addition, the outlet of the compressor should also be installed check valve. In summary, in order to avoid the backflow of the medium, in the equipment, installation or pipeline should be installed check valve in general in the nominal diameter of 50mm of the horizontal pipeline are selected vertical lift check valve. Straight lift check valve in the horizontal pipeline and straight pipeline can be installed.

Check valve refers to the valve that automatically opens and closes the valve flap by relying on the flow of the medium itself to prevent the backflow of the medium, also known as check valve, one-way valve, reverse flow valve, and back pressure valve.