JIS10K-manufacture,factory,supplier from China

(Total 10 Products for JIS10K)
1, easy to open and close quickly, labor saving, fluid resistance is small, can often operate.  2, simple structure, small size, light weight.  3, can transport mud, at the mouth of the least liquid accumulation.  4. Good sealing can be achieved under low pressure.
  Contacta ahora
This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.SizeDN100-DN1800DN100-DN1800Working pressure16Bar10BarShell24Bar15BarSeal18Bar11BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system          Chemical processingDesalination plants   Drilling rigs    Drinking wate
  Contacta ahora
100% bi-directional tight close-off. set up with out restrction in route of drift.decreased weight and overall dimensions.low pressure loss and reduced energy prices.
  Contacta ahora
As compared with different filtration device, it is one of the only gadget in reclaimed water reuse engineering.  furthermore, the water excellent after y-type filter out treatment not only reaches the release wellknown stipulated by way of the state, however additionally realizes the cause of repetition and recycling. Technical Parameters:SizeDN40-DN600Working pressure16Bar10BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast   and bilge system            Chemical processingDesalination plants   Drillin
  Contacta ahora
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform.  2, easy structure, small size, light weight.  Three, can shipping dust, on the mouth of the least liquid accumulation.  Four.
  Contacta ahora
100% bi-directional tight close-off. installation without restrction in route of go with the flow.reduced weight and average dimensions.low strain loss and reduced strength expenses.
  Contacta ahora
Size:DN25-DN1200Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67   API 609  BS5155Inspection & Test:API 598  ISO 5208  EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
  Contacta ahora
Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67   API 609  BS5155Inspection & Test:API 598  ISO 5208  EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
  Contacta ahora
1, the electrical butterfly valve is handy to open and near fast, labor-saving, fluid resistance is small, can regularly operate.  2, electric powered butterfly valve easy shape, small length, mild weight.  3, electric powered butterfly valve can transport mud, at the mouth of the least liquid accumulation.  Four, electric powered butterfly valve below low strain, can gain excellent sealing.  5, electric powered butterfly valve adjustment overall performance is right.Size:DN25-DN1200  Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/S
  Contacta ahora
1, easy to open and near quickly, hard work saving, fluid resistance is small, can frequently perform.  2, easy structure, small size, light weight.  Three, can shipping dust, on the mouth of the least liquid accumulation.  Four.
  Contacta ahora
Relate News
Entering 2022, our orders for butterfly valves and check valves are increasingly full, and the delivery date has been scheduled to April. We will continue to maintain a booming production and sales situation, and will not be affected by the Spring Festival holiday at all. The delivery date will start in late February.In addition, in a new field, the photovoltaic new energy business sector, our company continued to win the bid for the supporting projects for the newly expanded production base of JA Technology and LONGi Group.
Advantage 1. The opening and closing is convenient, quick, labor-saving, low in fluid resistance, and can be operated frequently.2. Simple structure, small overall size, short structural length, small volume and light weight, which is suitable for large-diameter valves.3. Mud can be transported, and the liquid accumulated at the pipe mouth is the least.4. Under low pressure, good sealing can be achieved.5. Good adjustment performance. 6. When fully opened, the effective circulation area of the valve seat channel is large, and the fluid resistance is small.7.
1. Butterfly valve is composed of valve body, valve seat, valve plate and valve stem, and all fittings are exposed and can be seen at a glance; Ball valve is composed of valve body, valve core (a round ball) and valve stem. The position of valve core is inside the valve body, and only part of it can be seen by naked eyes, so the sealing performance of ball valve is better than that of butterfly valve.2. Butterfly valves are relatively simple in structure, and butterfly valves with low pressure are generally used. The zui high pressure of butterfly valves can only reach 64kg.
The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.
Check valve is a valve installed in the pipeline to prevent the backflow of media. Check valves can be used on many types of pipelines such as over water, oil and gas, etc.
Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.
Rubber soft joints have been widely used in the industry. The installation of rubber soft joints requires different installation requirements according to different types of rubber joints. Threaded screwed rubber joints: Pay attention to the installation of screwed rubber joints. The pipe fittings are laid flat on a horizontal surface. When installing, it is necessary to screw the threaded structure into the lifting section of the pipe fittings, and then screw the other section of the pipe fittings, keeping it on the horizontal plane to prevent uneven force during the installation process.
The check valve opening and closing parts are opened or closed by themselves by the flow and force of the medium to prevent the backflow of the medium. The valve is called a check valve. The check valve belongs to the automatic valve category, which is mainly used in the pipeline where the medium flows in one direction, and only allows the medium to flow in one direction to prevent accidents. The check valve, also known as a one-way valve or a check valve, is used to prevent the backflow of the medium in the pipeline.
1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden. 2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top). 3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force). 4. Gate valve with transmission mechanism shall be installed according to the product instruction manual. 5.
Y-kind strainer as an fundamental high-efficiency filtration system within the purification system engineering, has performed a exquisite position within the remedy of domestic wastewater and business sewage. with various blessings in layout and alertness, it's miles now desired.