Non-Rising Gate valve-manufacture,factory,supplier from China

(Total 10 Products for Non-Rising Gate valve)

Ductile Iron Gate Valve ANSI/DIN/JIS Standard

F4 Ductile Iron Gate Valve

Gate valves are characterised as having either a rising or a nonrising stem. rising stems offer a visual indication of valve function due to the fact the stem is connected to the gate such that the gate and stem upward push and lower together because the valve is operated. nonrising stem valves may additionally have a pointer threaded onto the upper end of the stem to suggest valve role, since the gate travels up or down the stem on the threads with out elevating or reducing the stem.

Contacta ahora

WRAS rubber Gate Valve DIN PN16

Gate valves are characterised as having either a rising or a nonrising stem. Rising stems provide a visual indication of valve position because the stem is attached to the gate such that the gate and stem rise and lower together as the valve is operated. Nonrising stem valves may have a pointer threaded onto the upper end of the stem to indicate valve position, since the gate travels up or down the stem on the threads without raising or lowering the stem.

Contacta ahora

DIN Gate Valve with Brass seat

Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards. Gate valves are typically constructed from cast iron, ductile iron, cast carbon steel, gun metal, stainless steel, alloy steels, and forged steels.Gate valves are characterised as having either a rising or a nonrising stem. Rising stems provide a visual indication of valve position because the stem is attached to the gate such that the gate and stem rise and lower together as the valve is operated.

Contacta ahora

ANSI Gate Valve

Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards.

Contacta ahora

Stainless steel knife gate valve ANSI/DIN/JIS

Gate valves commonly have flanged ends which are drilled in step with pipeline compatible flange dimensional standards. gate valves are commonly made out of cast iron, ductile iron, cast carbon metallic, gun metallic, stainless-steel, alloy steels, and forged steels.Gate valves are characterised as having both a growing or a nonrising stem. growing stems provide a visual indication of valve role because the stem is connected to the gate such that the gate and stem upward thrust and decrease collectively as the valve is operated.

Contacta ahora

Metal Seat Gate Valve ANSI/DIN/JIS

Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards.

Contacta ahora

DIN PN10-16 Y-Strainer

Y-kind strainer operation advantages embody complete automation, protection-unfastened, massive filtration location, excessive clear out overall performance, lengthy issuer existence, stainless-steel fabric, non-obligatory filtration accuracy, whole specifications. as compared with unique filtration tool, it is one of the quality device in reclaimed water reuse engineering. moreover, the water first rate after y-type filter remedy no longer simplest reaches the discharge standard stipulated through the kingdom, but furthermore realizes the purpose of repetition and recycling T

Contacta ahora

Strainer Mental

Y-kind strainer operation benefits encompass entire automation, safety-loose, big filtration location, excessive clean out normal overall performance, lengthy provider lifestyles, stainless steel material, non-obligatory filtration accuracy, complete specs. compared with unique filtration device, it's far one of the notable device in reclaimed water reuse engineering. moreover, the water awesome after y-kind clean out treatment not simplest reaches the discharge widespread stipulated through the dominion, but furthermore realizes the reason of repetition and recycling Tech

Contacta ahora

PN16 Y-STRAINER RED EPOXY COATING

Y-kind strainer operation advantages encompass entire automation, safety-loose, massive filtration place, excessive clean out overall performance, lengthy issuer life, stainless steel cloth, non-obligatory filtration accuracy, entire specs. as compared with unique filtration tool, it's miles one of the excellent tool in reclaimed water reuse engineering. furthermore, the water first-rate after y-kind clear out remedy no longer simplest reaches the release wellknown stipulated via the kingdom, but moreover realizes the motive of repetition and recycling Technical Param

Contacta ahora

Gear operator Wafer Type Butterfly Valve

Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contacta ahora

Relate News

The Advantages Of Gate Valve

Gate valve is a kind of cut-off valve, which is used to connect or cut off the medium in the pipeline. Gate valve's opening and closing member gate, driven by the valve stem, extend the seat to do linear lifting movement.Advantages of the gate valve.1. low fluid resistanceBecause the valve body of the gate valve internal media channel is straight, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.2.

Matters Needing Attention in the Use of Gate Valves

1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden. 2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top). 3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force). 4. Gate valve with transmission mechanism shall be installed according to the product instruction manual. 5.

Difference Between Butterfly Valve and Gate Valve

Different principlesButterfly valve, also known as flap valve, is a kind of regulating valve with simple structure. It can also be used for on-off control of low-pressure pipeline media, and it mainly plays the role of cutting off and throttling. When the butterfly valve is fully opened to fully closed, it is usually less than 90. The butterfly valve and the butterfly rod have no self-locking ability. In order to position the butterfly plate, a worm gear reducer should be installed on the valve stem.

Pressure Test Method Of Check Valve

Check valve is a valve that relies on the medium itself to flow and automatically open and close the valve flap, used to prevent the backflow of the medium, also known as check valve, check valve, backflow valve, and back pressure valve.

The development trend of electric butterfly valve

Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.

China Refrigation Equipment Exhibition

The Chinese Refrigation Equipment Exhibition is the most special exhibition in Refrigation field.Our Diefei Brand Check valve and Butterfly valve is an important part of this Exhibition.We have the expertise and experience to produce,also have a big After-service team . We get the high apprecition from our customers.

Features of electric ball valve

The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.

Common Check Valve Materials

Check valve is a valve installed in the pipeline to prevent the backflow of media. Check valves can be used on many types of pipelines such as over water, oil and gas, etc.

Background of Butterfly Valve

Butterfly valve is a type of valve that uses a spherical butterfly plate as the opening and last component and turns with the valve stem to open, close and alter the fluid channel. the butterfly plate of the butterfly valve is set up in the diameter route of the pipe. in the cylindrical channel of the butterfly valve frame, the disc formed butterfly plate rotates around the axis of the valve stem at an perspective among 0 ° and 0 °. whilst the butterfly plate is at 0 °, the valve is closed, and when the butterfly plate is at ninety °, the valve is absolutely opened.

What Is The Advantage for Butterfly Valve

Butterfly Valve is a simple structure control valve,it can be used for switching control of low pressure pipeline medium. Our Butterfly Valve is a kind of valve that the disc rotate around the valve shafts to open and close. Features:1, opening and closing convenient and rapid, labor saving, fluid resistance is small, can often operate.2, simple structure, small size, short structure length, small volume, light weight, suitable for large diameter valve.3, can transport mud, the least liquid in the pipe mouth.4.