Valve Parts-manufacture,factory,supplier from China

(Total 10 Products for Valve Parts)

Threaded Ball Valve

Application1.Design and ManufactureANSI B16.12.Face to faceANSI B16.103.Flange End DimensionsBS45044.Working Pressure150PSI Steam Basic Rating5.Pressure TestAPI598Main Parts and MaterialsNumberPart NameMaterial1BodyCF8M/CF82BonnetCF8M/CF83BallSS304/SS3164SeatPTFE/RPTFE5GasketPTFE6StemSS AISI 4107Stem PackingPTFE8Stop CollarCarbon Steel(ASTM A307)9LeverSS304

Contacta ahora

Double Offset Flanged Type Butterfly Valve DIN PN10-16

This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.SizeDN100-DN1800DN100-DN1800Working pressure16Bar10BarShell24Bar15BarSeal18Bar11BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system Chemical processingDesalination plants Drilling rigs Drinking wate

Contacta ahora

Flanged Ball Valve Cast Iron Body

Application1.Design and ManufactureANSI B16.12.Face to faceANSI B16.103.Flange End DimensionsBS45044.Working Pressure150PSI Steam Basic Rating5.Pressure TestAPI598Main Parts and MaterialsNumberPart NameMaterial1BodyA126B/A536 65-45-122BonnetA126B/A536 65-45-123BallAISI 410/AISI 3044SeatPTFE/RPTFE5GasketPTFE6StemSS AISI 4107Stem PackingPTFE8Stop CollarCarbon Steel(ASTM A307)9Gland FlangeA126B/A536 65-45-1210LeverA536 65-45-12

Contacta ahora

Wafer Type Single Board Check Valve Aluminum

Wafer Type Single Board Check Valve Stainless Steel

Take a look at valve refers to the outlet and ultimate parts of the round disc and through its own weight and media stress generated movement to block the media float again valve. automatic valve magnificence, also referred to as test valve, one-way valve, backflow valve or isolation valve.Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat material:NBR/EPDM/VITON Standard：ANSI/JIS/DIN/BS Usage：They are used for pipe of transporting water with such medium as water sewage and seawater.It can avoid media

Contacta ahora

BS4504 PN10 16 Eccentric Flanged Type Butterfly Valve

Contacta ahora

Flanged Type Stainless Steel Butterfly Valve DIN PN10-16 10-16

Flanged Type Stainless Steel Butterfly Valve DIN PN10-16 /ANSI 125/ANSI150

Contacta ahora

DIN PN10 /ANSI 150 Pneumatic Butterfly Valve Rubber Seat

butterfly plate outer circle using spherical shape, improve the sealing performance and prolong the service life of the valve, with pressure open and close more than 50,000 times still maintain zero leakage. the sealing parts can be replaced, and the sealing is reliable to achieve two-way sealing. butterfly plate can be spraying coating according to user requirements, such as nylon or ptfe. the valve can be designed as flange connection and clamping connection.

Contacta ahora

two shaft butterfly valve,pinless butterfly valve

Two Shaft Wafer Type Butterfly Valve

Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contacta ahora

Flange Type Butterfly Valve Flanged Type

Flange Type Butterfly Valve Bronze material for sea water

This butterfly valve series has many of the design features and benefits such as high Cv ratings ,minimum parts exposed to the line media ,greater reliability and a proven record of long service life .A major design advantage of this valve product lines is international compatibility.Sizes:DN100-DN1800Pressure Class:PN10 OR PN16Design:API609 BSEN593 BS5155Test: API598 ISO5208 EN12266-1Flange Connection: DIN2501 PN10/16,ISO7005-2 PN10/16, EN1092-2 PN10/16,ANSI B16.5 class 150LB ANSI B16.47 Series A class 150LB,ANSI B16.1 MSS SP44 class150LB WAAW C207Top Flange:ISO5211Face to Face:EN558-1 s

Contacta ahora

2-PCS Ball Valve Screwed End

Contacta ahora

Relate News

The principle of check valve opening and closing

The check valve opening and closing parts are opened or closed by themselves by the flow and force of the medium to prevent the backflow of the medium. The valve is called a check valve. The check valve belongs to the automatic valve category, which is mainly used in the pipeline where the medium flows in one direction, and only allows the medium to flow in one direction to prevent accidents. The check valve, also known as a one-way valve or a check valve, is used to prevent the backflow of the medium in the pipeline.

Pressure Test Method Of Check Valve

Check valve is a valve that relies on the medium itself to flow and automatically open and close the valve flap, used to prevent the backflow of the medium, also known as check valve, check valve, backflow valve, and back pressure valve.

The Advantages Of Gate Valve

Gate valve is a kind of cut-off valve, which is used to connect or cut off the medium in the pipeline. Gate valve's opening and closing member gate, driven by the valve stem, extend the seat to do linear lifting movement.Advantages of the gate valve.1. low fluid resistanceBecause the valve body of the gate valve internal media channel is straight, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.2.

Features of electric ball valve

The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.

The development trend of electric butterfly valve

Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.

Common Check Valve Materials

Check valve is a valve installed in the pipeline to prevent the backflow of media. Check valves can be used on many types of pipelines such as over water, oil and gas, etc.

China Refrigation Equipment Exhibition

The Chinese Refrigation Equipment Exhibition is the most special exhibition in Refrigation field.Our Diefei Brand Check valve and Butterfly valve is an important part of this Exhibition.We have the expertise and experience to produce,also have a big After-service team . We get the high apprecition from our customers.

Background of Butterfly Valve

Butterfly valve is a type of valve that uses a spherical butterfly plate as the opening and last component and turns with the valve stem to open, close and alter the fluid channel. the butterfly plate of the butterfly valve is set up in the diameter route of the pipe. in the cylindrical channel of the butterfly valve frame, the disc formed butterfly plate rotates around the axis of the valve stem at an perspective among 0 ° and 0 °. whilst the butterfly plate is at 0 °, the valve is closed, and when the butterfly plate is at ninety °, the valve is absolutely opened.

What Is The Advantage for Butterfly Valve

Butterfly Valve is a simple structure control valve,it can be used for switching control of low pressure pipeline medium. Our Butterfly Valve is a kind of valve that the disc rotate around the valve shafts to open and close. Features:1, opening and closing convenient and rapid, labor saving, fluid resistance is small, can often operate.2, simple structure, small size, short structure length, small volume, light weight, suitable for large diameter valve.3, can transport mud, the least liquid in the pipe mouth.4.

The Differences Between Soft Seal Butterfly Valve And Hard Sear

Hard seal butterfly valve is called "hard seal" when both sides of the seal are made of metal or other hard materials. The sealing function of this kind of seal is poor, but it is resistant to high temperature, wear and tear, and has good mechanical function.