VITON seat Wafer Butterfly Valve-manufacture,factory,supplier from China

(Total 10 Products for VITON seat Wafer Butterfly Valve)

Gear operator Wafer Type Butterfly Valve

Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contacta ahora

Wafer Type Butterfly Valve Pinless type

Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contacta ahora

two shaft butterfly valve,pinless butterfly valve

Two Shaft Wafer Type Butterfly Valve

Contacta ahora

Bronze Wafer Type Butterfly Valve

Huge selection of substances, relevant for various medium.Small in length and light in weight, smooth installation and upkeep.it may be established anyplace needed.Simple and compact creation,Waft block is small.first rate law overall performance.Minimized running torque, electricity saving.Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 6

Contacta ahora

PTFE Seat Wafer Type Butterfly Valve

Extensive choice of materials, applicable for diverse medium.Small in size and light in weight, smooth installation and upkeep.it may be mounted anyplace wished.Easy and compact construction,Glide block is small.first rate regulation performance.Minimized running torque, strength saving.Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 609 &

Contacta ahora

Pinless Anti-condensation Aluminum Butterfly Valve with Rubber Seat

The anti-condensation butterfly valve usually refers to the butterfly valve whose body is made of aluminum alloy.

Contacta ahora

Wafer Type Dual Check Valve stainless steel body

One Board Wafer Type Check Valve CF8 Disc

At the contrary, the valve is closed while the medium flows back. swing test valves have a disc this is tilted and rotates on its axis and paintings in a similar way to lift test valves. check valves are often used as bottom valves in pumping units to save you the backflow of water. check valves are combined with globe valves to provide safety isolation. risks are large resistance, poor sealing when final.Cast Iron Wafer Type Check Valve Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat m

Contacta ahora

Electric Butterfly Valve wafer type SS316 disc

electric butterfly valve can transport mud, at the mouth of the least liquid accumulation. electric butterfly valve under low pressure, can achieve good sealing.

Contacta ahora

Rubber Seat U Type Butterfly Valve

Resilient seated butterfly valve is a double flanged design which may be used for dead-give up carrier .this butterfly valve collection has some of the layout functions and benefits including high cv rankings ,minimum elements exposed to the road media ,greater reliability and a validated report of long provider life .a primary design advantage of this valve product traces is international compatibility.Technical Parameters:SizeDN32-DN600DN650-DN2000Working pressure16Bar10BarShell24Bar15BarSeal(Air)6Bar6BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system

Contacta ahora

Wafer Type Butterfly Valve CF8M Disc EPDM Seat Gear Operator

Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / PneumaticStandard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.

Contacta ahora

Relate News

The Advantages Of Gate Valve

Gate valve is a kind of cut-off valve, which is used to connect or cut off the medium in the pipeline. Gate valve's opening and closing member gate, driven by the valve stem, extend the seat to do linear lifting movement.Advantages of the gate valve.1. low fluid resistanceBecause the valve body of the gate valve internal media channel is straight, the media flow through the gate valve does not change its flow direction, so the fluid resistance is small.2.

The meaning of butterfly valve and the problems that are easily overlooked in the use process

In production and life, the emergence of valves is that the utilization rate of their valves and accessories is getting higher and higher, such as check valves, check valves, electric butterfly valves, pneumatic butterfly valves, rubber soft joints, electric ball valves, one-way valves, and wafer butterfly valves. , filter, etc., which have brought great convenience to production and life.

Advantages Of Two Shaft Wafer Type Butterfly Valve

Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.

The development trend of electric butterfly valve

Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.

Advantages and Disadvantages of Butterfly Valve

Advantage 1. The opening and closing is convenient, quick, labor-saving, low in fluid resistance, and can be operated frequently.2. Simple structure, small overall size, short structural length, small volume and light weight, which is suitable for large-diameter valves.3. Mud can be transported, and the liquid accumulated at the pipe mouth is the least.4. Under low pressure, good sealing can be achieved.5. Good adjustment performance. 6. When fully opened, the effective circulation area of the valve seat channel is large, and the fluid resistance is small.7.

Background of Butterfly Valve

Butterfly valve is a type of valve that uses a spherical butterfly plate as the opening and last component and turns with the valve stem to open, close and alter the fluid channel. the butterfly plate of the butterfly valve is set up in the diameter route of the pipe. in the cylindrical channel of the butterfly valve frame, the disc formed butterfly plate rotates around the axis of the valve stem at an perspective among 0 ° and 0 °. whilst the butterfly plate is at 0 °, the valve is closed, and when the butterfly plate is at ninety °, the valve is absolutely opened.

The Difference Between Ball Valve and Butterfly Valve

1. Butterfly valve is composed of valve body, valve seat, valve plate and valve stem, and all fittings are exposed and can be seen at a glance; Ball valve is composed of valve body, valve core (a round ball) and valve stem. The position of valve core is inside the valve body, and only part of it can be seen by naked eyes, so the sealing performance of ball valve is better than that of butterfly valve.2. Butterfly valves are relatively simple in structure, and butterfly valves with low pressure are generally used. The zui high pressure of butterfly valves can only reach 64kg.

Introduction of Butterfly Valve Characteristics

1. Butterfly valve has the characteristics of simple structure, small volume, light weight, low material consumption, small installation size, quick switch, 90 reciprocating rotation and small driving torque, etc. It is used to cut off, connect and adjust the medium in the pipeline, and has good fluid control characteristics and closing and sealing performance.2. Butterfly valves can transport mud, and the liquid accumulated at the pipe mouth is the least. Under low pressure, good sealing can be achieved. Good adjustment performance.3.

What Is The Advantage for Butterfly Valve

Butterfly Valve is a simple structure control valve,it can be used for switching control of low pressure pipeline medium. Our Butterfly Valve is a kind of valve that the disc rotate around the valve shafts to open and close. Features:1, opening and closing convenient and rapid, labor saving, fluid resistance is small, can often operate.2, simple structure, small size, short structure length, small volume, light weight, suitable for large diameter valve.3, can transport mud, the least liquid in the pipe mouth.4.

Introduction of Slient Check Valve Wafer Type

Test valve refers to the hole and remaining elements of the circular disc and with the aid of its own weight and media stress generated motion to block the media float lower back valve. automatic valve elegance, additionally referred to as test valve, one-way valve, backflow valve or isolation valve. disc movement is split into lifting and swing. elevate test valves are comparable in creation to globe valves besides for the stem that drives the disc. the medium flows in from the inlet quit (decrease side) and flows out from the hole give up (higher aspect). valve