Wafer type butterfly valve with pin-manufacture,factory,supplier from China
(Total 10 Products for Wafer type butterfly valve with pin)
electric butterfly valve can transport mud, at the mouth of the least liquid accumulation. electric butterfly valve under low pressure, can achieve good sealing.
Contacta ahora
Design CodeAPI 609Inspection &TestAPI 598End StandardDIN PN10,DIN PN16, ANSI B16.1, JIS 10KFace to FaceAPI 609MaterialBodyCast Iron/Ductile Iron/Cast SteelDiscDI+Ni/SS304/SS316/AL-BZStemSS416/SS304/SS316/17-PHSeatEPDM/NBR/VITON/PTFE/CROperationHandlever GearboxSizeDN25-DN1200
Contacta ahora
Butterfly valve offers economical,efficient,and reliable service for grooved end piping applications.It is easily installed with two grooved end couplings.
Contacta ahora
At the contrary, the valve is closed while the medium flows back. swing test valves have a disc this is tilted and rotates on its axis and paintings in a similar way to lift test valves. check valves are often used as bottom valves in pumping units to save you the backflow of water. check valves are combined with globe valves to provide safety isolation. risks are large resistance, poor sealing when final.Cast Iron Wafer Type Check Valve Material:The body materia: GG25,GGG40,GGG50The disc material: DI/SS304/SS316/AL-BZThe stem/spring material: SS416/SS304The seat m
Contacta ahora
Resilient seated butterfly valve is a double flanged design which may be used for dead-give up carrier .this butterfly valve collection has some of the layout functions and benefits including high cv rankings ,minimum elements exposed to the road media ,greater reliability and a validated report of long provider life .a primary design advantage of this valve product traces is international compatibility.Technical Parameters:SizeDN32-DN600DN650-DN2000Working pressure16Bar10BarShell24Bar15BarSeal(Air)6Bar6BarOperating Temperature-40℃~+160℃Operating EnvironmentBallast and bilge system
Contacta ahora
100% bi-directional tight close-off. set up without restrction in path of waft.decreased weight and overall dimensions.low pressure loss and decreased power prices.
Contacta ahora
Design CodeAPI 609Inspection &TestAPI 598End StandardDIN PN10,DIN PN16, ANSI B16.1, JIS 10KFace to FaceAPI 609MaterialBodyCast Iron/Ductile Iron/Cast SteelDiscDI+Ni/SS304/SS316/AL-BZStemSS416/SS304/SS316/17-PHSeatEPDM/NBR/VITON/PTFE/CROperationHandlever GearboxSizeDN25-DN1200
Contacta ahora
Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
Contacta ahora
Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
Contacta ahora
Size:DN25-DN1200 Material:Body:Cast Iron/Ductile Iron/Cast SteelDisc:DI+Ni/SS304/SS316/AL-BZ/CF3M/SS2205/SS2507Stem:SS416/SS304/SS316/17-PH/Monel K500Seat:EPDM/NBR/VITON/PTFE/HYPALONOperation:Handlever /Gearbox/Electric / Pneumatic Standard:Design Standard:EN 593 , MSS SP67 API 609 BS5155Inspection & Test:API 598 ISO 5208 EN 12266End Standard:ANSI B16.1 CL. 125LB /B16.5 CL.
Contacta ahora
Relate News
FIRST:The difference between butterfly valve has a pin and without pin: Price: the without pin butterfly valve is more expensive than the pin ones. Usage: WITHOUT PIN TYPE REDUCE THE RISK OF LEAKAGE.
Electric butterfly valve means that the butterfly valve is equipped with an electric actuator, which controls the opening and closing of the valve through the electric energy provided by the power supply, so as to realize remote centralized control and automatic operation. Electric butterfly valve can be divided into flange type and disc type according to the connection method, which is an important execution unit in the field of industrial automation control.
Advantages:1. easy and quick to start and close, labor-saving, low fluid resistance, can be operated frequently2. Simple structure, small size, short structure length, small volume, light weight3. start and close torque is small, because the butterfly plate on both sides of the shaft is basically equal to the action of the medium, and the direction of the torque generated is opposite, so it is relatively labor-saving4. The material of sealing surface generally adopts rubber, plastic, so the low pressure sealing performance is good.5.
Butterfly valve is a type of valve that uses a spherical butterfly plate as the opening and last component and turns with the valve stem to open, close and alter the fluid channel. the butterfly plate of the butterfly valve is set up in the diameter route of the pipe. in the cylindrical channel of the butterfly valve frame, the disc formed butterfly plate rotates around the axis of the valve stem at an perspective among 0 ° and 0 °. whilst the butterfly plate is at 0 °, the valve is closed, and when the butterfly plate is at ninety °, the valve is absolutely opened.
In production and life, the emergence of valves is that the utilization rate of their valves and accessories is getting higher and higher, such as check valves, check valves, electric butterfly valves, pneumatic butterfly valves, rubber soft joints, electric ball valves, one-way valves, and wafer butterfly valves. , filter, etc., which have brought great convenience to production and life.
Test valve refers to the hole and remaining elements of the circular disc and with the aid of its own weight and media stress generated motion to block the media float lower back valve. automatic valve elegance, additionally referred to as test valve, one-way valve, backflow valve or isolation valve. disc movement is split into lifting and swing. elevate test valves are comparable in creation to globe valves besides for the stem that drives the disc. the medium flows in from the inlet quit (decrease side) and flows out from the hole give up (higher aspect). valve
The high-pressure pneumatic ball valve only needs to use the pneumatic actuator to rotate the air source by 90 degrees and a small rolling torque to be tightly closed. Completely equal valve body cavity provides medium with low resistance and straight-through flow path. It is generally believed that the ball valve is suitable for direct opening and closing applications, but recent developments have designed the ball valve so that it can be used for throttling and control systems.
Butterfly Valve is a simple structure control valve,it can be used for switching control of low pressure pipeline medium. Our Butterfly Valve is a kind of valve that the disc rotate around the valve shafts to open and close. Features:1, opening and closing convenient and rapid, labor saving, fluid resistance is small, can often operate.2, simple structure, small size, short structure length, small volume, light weight, suitable for large diameter valve.3, can transport mud, the least liquid in the pipe mouth.4.
1. Butterfly valve is composed of valve body, valve seat, valve plate and valve stem, and all fittings are exposed and can be seen at a glance; Ball valve is composed of valve body, valve core (a round ball) and valve stem. The position of valve core is inside the valve body, and only part of it can be seen by naked eyes, so the sealing performance of ball valve is better than that of butterfly valve.2. Butterfly valves are relatively simple in structure, and butterfly valves with low pressure are generally used. The zui high pressure of butterfly valves can only reach 64kg.
1. Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is forbidden.
2. The double gate valve should be installed vertically (i.e. the valve stem is in the vertical position and the handwheel is at the top).
3. The gate valve with bypass valve should be opened before opening (to balance the pressure difference between inlet and outlet and reduce the opening force).
4. Gate valve with transmission mechanism shall be installed according to the product instruction manual.
5.
